Contents
Does the evaporative air cooler have a high requirement for water source
Evaporative air conditioner is mainly installed in the production workshops and warehouses of enterprises that need ventilation and cooling.
The cooling principle of the evaporative air conditioner is to take away the heat in the air through the evaporation of water.
So, does the evaporative air conditioner have a high requirement for water source?
The cleanliness of the water source should be ensured
In order to keep the cold air entering the room fresh and without peculiar smell, the cleanliness of the water source should be ensured first.
Water with impurities will have a great impact on the fuselage after entering the evaporative air conditioner.
For example, it will lead to blockage of the inlet valve of the evaporative air conditioner.
Long time use of Polluted water will cause the air cooler storage tank to produce dirt, evap cooler pads will also grow a lot of dirty things.
If the evaporative air conditioner is not cleaned regularly, the blown wind will have a great odor, and the cooling effect of the machine will also be affected.
Even though tap water is clean when it leaves the factory,
But many buried pipes are rusted iron pipes or broken pipes, and the water will not be very clean when transported through such pipes.
Sometimes secondary pollution is inevitable.
Evaporative air cooler has certain requirements for water pressure.
Many factories or enterprises first send tap water to the top of the building and then to each floor.
If the pressure in the water tower is insufficient, it can only basically meet the use of low floor evaporative air cooler.
Near the high floor of the water tower, it is easy to appear lack of water pressure caused by water intake, refrigeration and other problems.
Therefore, in the use of evaporative air conditioner, in order to ensure better results, as well as the service life of the equipment, we should pay attention to the cleanliness of the water source and water pressure.